| User Information and Instruction Sheet |
| Summary: This American Beauty® Soldering
System has been assembled for your convenience, in order to help eliminate
confusion when ordering equipment to be used for most of your high
capacity soldering and thermal management applications. |
Description: System Description: This System consists
of a Model 105B2
(1,100 watt) Power Unit, a Model 105258
Medium High-Heat Carbon Pliers Handpiece and a Model 10519
Footswitch.
- Power Unit Description: The Model 105B2
Power Unit has a low-voltage, high amperage, selectively variable
output, isolated transformer. The output voltage is 1.2-5.8 VAC (with
no load), selectable through a multi-tapped primary switch and three
secondary taps. This Power Unit may be adapted to automated and fixtured
production tooling. For more detailed information please read the
Information/Instruction sheet included with the Power Unit in this Kit.
- Handpiece Description: Medium High-Heat Carbon Electrode Tweezer
Style Handpiece. Supplied with two 1/4" x 1/4" x 1-1/2"(6.35 mm x 6.35
mm x 38.1 mm) Carbon Block Electrodes (mounted in heavy-duty
Nickel-plated Brass adapters) and an Allen wrench for assisting with
Electrode replacement. This Handpiece features four-foot (1.22 m) 10 AWG
high-stranded DLO cables (for flexibility), with taper pin quick connect
terminals for connection to American Beauty® Power Units
(push in turning clockwise until snug). The handles are padded for
operator comfort. The Jaws open to 9/16" (14.28 mm) and may be lightly
clamped down onto the work piece to hold it in place using the
Handpieces tweezer-type design. Only light pressure between the carbons
and the work piece is necessary to conduct current, in order to provide
the resistance path that is required to generate heat. The resistance of
the specially formulated carbons is such that even high-temperature
solders may be used when required. The tool is ruggedly built of
high-grade materials and works best when the setscrews securing the
carbons are checked periodically for tightness. For more detailed
information please read the Information/Instruction sheet included with
the Handpiece in this Kit.
- Footswitch Description: The Model 10519
Footswitch is a rugged, industrial switch, (wired normally open), with a
six-foot (1.83 m) 18-3 SJT cord and NEMA 5-15 P/R piggyback style
plug/receptacle. This footswitch is often used, to better control the
cycle time needed for an application.
|
| Uses: This System can be used to create accurate,
trustworthy solder joints in many applications which include but are not
limited to copper tubing, semi-rigid coaxial cable, microwave connectors,
motor stators and electrical motor rebuilding applications. |
| Replacement
Electrodes/Elements: Model 105159 |
SOLDERS CONTAINING LEAD, WHICH IS KNOWN TO
THE STATE OF CALIFORNIA TO CAUSE CANCER AND BIRTH DEFECTS (OR OTHER
REPRODUCTIVE HARM) OR OTHER PROPOSITION 65 LISTED CHEMICALS. |
