Footswitch Model 10519 For foot control of most power units up to and including 1800 Watts. Eliminates sparking on contact and removal of electrodes from work. Provides more accurate timing of soldering operations. Recommended in most applications. A rugged, industrial switch with six foot (1.83m) three-wire cord and NEMA 5-15 P/R piggyback plug. Weight: 1.0LBS (0.45KGS) |
||
Same as Model 10519, except with two-wire Midget Twist Lock plug. Must be used with Twist Lock style resistance soldering Power Units when using a standard handpiece. (105B2TL, 105C1TL, 105C2) Weight: 1.0LBS (0.45KGS) |
||
Grounding Vise for Holding Parts
Hands-Free Model 105V12
Weight: 3.5LBS (1.575KGS) |
||
Lead for Return Current - Alligator
Clamp Model 10512A Specifications:
Weight: 0.3LBS (0.135KGS) Used with the following tools: |
||
Leads for Return Current - Standard
Clamp Model 10512 Specifications:
Weight: 0.4LBS (0.18KGS) Used with the following tool:
|
||
Lead for Return Current - Heavy-Duty "C"
Clamp Model 10537 Specifications:
Weight: 0.6LBS (0.27KGS) Used with the following tool:
|
||
Panel Attachement for 100 and 250 Watt
Power Units Model 10595 Attaches to Power Units 105A3 or 105A12 to hold two 1/8" (3.18mm) diameter, adjustable electrodes. Takes the place of "standing soldering iron", but draws full current only when working. For soldering and desoldering. Popular for auto-electric remanufacturing. Weight: 1.0LBS (0.45KGS) Replacement Electrodes: Model # 10594 |
||
Panel Attachement for 1,100 Watt Power
Unit Model 10513A Attaches to Model 105B2 Power Unit to hold two electrodes. Comes with two 1/4" (6.35mm) and two 3/8" (9.53mm) diameter carbon electrodes and two Adapter Bushings, Model 10538. Used to desolder and assemble automotive alternators, starters for autoelectric rebuild, bus bar and similar electrical work. Included in system:
Weight: 6.0LBS (2.7KGS) Replacement Electrodes: Model # 10549 |
||
Panel Attachement for 1,800 Watt Power
Unit Model 10513B Same as Model 10513A, except for use with Power Unit Model 105C1. Weight: 6.0LBS (2.7KGS) Replacement Electrodes: Model # 10550 |
||
Handpiece Adapter Model 105Y10 Connects both jaws of soldering tweezers to one terminal of power unit. Must use with a grounding accessory, Model 10512 recommened. The part held by tweezers is heated when in contact with grounded workpiece. The result is more even heating between the two electrodes of the handpiece. Excellent for hobbyists for brass locomotives and scratch building. Weight: 1.0LBS (0.45KGS) |